- We work with global industries!
| Thickness Range of Stainless Plate | 3/16″ Thru 6″ Thick Stainless Steel Plate |
| Common Widths of Stainless Plate Coil | 48″ Wide – 60″ Wide – 72″ Wide – 78.75″ (2 Meter) wide – 84″ wide – 96″ wide – 120″ wide & other widths upon customer request. |
| 300 Series Stainless Steel Grades | 302 – 303 – 304 – 304L – 304L Polished – 304H – 309 – 309S – 309H – 310 – 310S – 310H – 316L – 316L Polished – 317L – 317LMN – 321 – 321H – 330 – 347 347H |
| 400 Series Stainless Steel Grades | 405 – 410 – 410S – 416 – 420 – 440C |
| Duplex Stainless Steel Grades | LDX 2101 – Duplex 2205 – Duplex 2507 |
| Precipitation Hardening Grades | 17-4PH – 17-4 H1150 (per customer request) – 15-5PH |
| Nickel Alloy Grades | Alloy 20 – Alloy 200 – Alloy 400 – Alloy 600 – Alloy 800 – Alloy 800HT – Alloy C-276 (nickel grades may require lead time) |
It is highly reflective and created by polishing the stainless steel. This polishing
process enhances appearance and consistency which makes cleaning easier. It also hides
the after-effects of welding and surface damage.
It is done by mechanically treating the surface with a series of progressively finer
abrasives. On the other hand a special rolling procedure is utilized which can simulate
mechanical abrasion appearance. For this stage, it is important to remove deep scratches
as any surface defects will be visible on the finished product. The last process
involves buffing the surface for 5-10 minutes to make a mirror-like, highly reflective
finish.
Mirror finishing improves corrosion resistance and eradicates crevices where corrosive
particles can lodge themselves.
Its common applications include mirrors, ornamental trim, clean rooms, column covers,
wall panels and reflectors.
It is a type of surface finish applied by utilizing various abrasive machining processes.
It is a machining process which is used in various industries from small parts of
precision instruments to large products such as an aircraft.
Within metal architecture, polished finish has been selected for various places from
curtain walls, interiors and exteriors, fittings, and monuments for its ability to
accommodate various designs.
Brushing the stainless steel sheet offers a particular look with a muted luster and a pattern of fine parallel lines. It has strong decorative plead without being too reflective, because too much reflectiveness can be unacceptable. For example, excessively reflective stainless steel accents on a building may be blinding in bright sunlight. The disadvantage to this finish are reduced corrosion resistance, because the grooves of the finish are permitting to rust. This finish is created by sanding the stainless steel sheet in one direction with a 120-180 grit belt, accompanied by softening with 80-120 grit medium non-woven belt.
| Specifications | ASTM A240 / ASME SA 240 material |
|---|---|
| Thickness | 4mm To 100mm |
| Width |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc |
| Length | 6000mm, 3000mm, 2440mm, 5800mm, 2000mm, etc |
| Surface | mirror, NO.4, NO.1, 2D, BA, NO.8, 8K, 2B, embossed, checkered, hair
line, sand blast, Brush, etching Supplier |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) Manufacturer and Supplier |
| Finish | Description |
|---|---|
| 2B | Smooth finish, reflective grey sheen. Most widely used surface finish. |
| Bright Annealed (BA) | Cold rolled, annealed in a controlled atmosphere to retain a highly reflective finish. |
| Dull Polish (DP) | Selected for ease of cleaning, brushed look, non-reflective, used extensively in the catering industry, also push plates and kick plates. |
| Hot Rolled (HR) | Scaled finish, ideal if surface finish is not a key concern. |
Its common applications include:
Check Stainless steel sheet Specifiaction properties, buy stainless steel trim strips in all thickness and sizes
| Specifications | ASTM A240 / ASME SA 240 material |
|---|---|
| Thickness | 4mm To 100mm |
| Width |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc |
| Length | 6000mm, 3000mm, 2440mm, 5800mm, 2000mm, etc |
| Surface | mirror, NO.4, NO.1, 2D, BA, NO.8, 8K, 2B, embossed, checkered, hair line,
sand blast, Brush, etching Supplier |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) Manufacturer and Supplier |